Torque

What Is Torque?

Torque is the turning effect of a force applied to an object. When a force causes an object to turn or rotate, the rotation takes place about a pivot or an axis.

For example, when we turn a screw using a screwdriver, the force applied to the screwdriver produces torque that turns the screw.

Torque is also referred to as the Moment of Force, or simply Moment.

To understand torque more easily, let us compare the effects of force on linear and rotational motion.

Force and Linear Motion: When an object is pushed or pulled, the applied force can change its linear motion. For example, pushing a box across the floor can cause it to move forward.

Torque and Rotational Motion: When a force produces a turning effect about a pivot or an axis, it creates torque. For example, pushing a door near its handle produces torque about the hinges, causing the door to open.

The turning effect depends on three factors:

    • The magnitude of the applied force.
    • The perpendicular distance between the axis of rotation and the line of action of the force.
    • The direction in which the force is applied.

A force does not always produce rotation. Its turning effect depends on how and where it acts relative to the axis.

Understanding Torque

Consider the door example again. A door is attached to its frame by hinges. When we push the door near its handle, it opens easily. However, applying the same force near the hinges produces a much smaller turning effect.

This happens because the handle is farther from the axis of rotation.

The hinges form the axis of rotation, while the perpendicular distance from this axis to the line of action of the force determines the lever arm used to calculate torque.

The greater the perpendicular distance from the axis to the force’s line of action, the greater the torque for the same force.

This principle explains why long-handled tools, such as spanners and wrenches, make it easier to turn tightly fastened nuts.

Formula for Torque

The magnitude of torque is calculated by multiplying the applied force by the perpendicular distance from the axis of rotation to the line of action of the force.

Torque = Force × Perpendicular Distance

τ = F × d

Where:

    • τ (tau) = Torque
    • F = Applied force
    • d = Perpendicular distance from the axis of rotation to the force’s line of action

If the force acts at an angle to the line joining the axis and the point of application, the formula becomes:

τ = r × F × sin θ

Where:

    • r = Distance from the axis to the point of application
    • θ = Angle between the axis and the point of application of the force

Torque is greatest when the force acts perpendicular to the line joining the axis and the point of application.

SI Unit of Torque

The SI unit of torque is the newton-metre (N m).

One newton-metre is the torque produced when a force of one newton acts perpendicular to a lever arm of one metre.

Although torque and work can both be expressed using newton-metres, they represent different physical quantities.

    • Torque describes the turning effect of a force.
    • Work describes energy transferred when a force causes displacement.

Work is normally expressed in joules (J), while torque is expressed in newton-metres (N m) to distinguish the two quantities.

Calculating Torque

Example:

A force of 20 N is applied perpendicular to a spanner at a distance of 0.4 m from the nut. Calculate the torque.

Given:

    • Force = 20 N
    • Perpendicular distance = 0.4 m

Calculation:

Torque = Force × Perpendicular Distance

τ = 20 × 0.4 = 8 N m

Answer: The torque produced is 8 newton-metres.

Clockwise and Anticlockwise Torque

A force can produce rotation in either direction (clockwise/anticlockwise) around an axis.

Example: A seesaw has a pivot at the centre of a horizontal plank. Applying a downward force on either side of the pivot produces torque, causing the seesaw to turn.

Clockwise Torque

Clockwise torque tends to rotate an object in the same direction as the hands of a clock (to the right).

For example, applying a downward force to the right side of a seesaw produces a clockwise turning effect about its central pivot at the bottom, and the left side gets pushed up.

Anticlockwise Torque

Anticlockwise torque tends to rotate an object in the opposite direction to the hands of a clock.

For example, applying a downward force to the left side of the seesaw produces an anticlockwise turning effect on the pivot at the bottom, and the right side pushes up.

In calculations involving rotation in a plane, one direction is conventionally assigned a positive sign and the other a negative sign.

A common convention is:

    • Anticlockwise torque: Positive (+)
    • Clockwise torque: Negative (−)

The opposite convention may also be used, provided it is applied consistently.

Torque and Rotational Motion

Torque plays a role in rotational motion similar to the role of force in linear motion.

    • A net force can change an object’s linear motion.
    • A net torque can change an object’s rotational motion.

When a net torque acts on a rigid object that can rotate about a fixed axis, it produces angular acceleration. This means the object may start rotating, speed up, slow down, or change its direction of rotation.

The moment of inertia describes an object’s resistance to changes in rotational motion about a specified axis.

For example, consider a playground merry-go-round. An empty merry-go-round is easier to start rotating than one carrying several children. The additional mass increases its moment of inertia, making it harder to change its rotational motion.

The relationship is expressed as:

τ = I × α

Where:

    • τ = Net torque
    • I = Moment of inertia
    • α = Angular acceleration

This relationship applies to a rigid body rotating about a fixed axis with a constant moment of inertia.

Torque and Rotational Equilibrium

An object is in rotational equilibrium when the net torque acting on it is zero.

Clockwise Torque = Anticlockwise Torque

Net Torque = 0

In rotational equilibrium, an object has no angular acceleration. It may remain at rest or continue rotating at a constant angular velocity.

Example: A balanced seesaw where a heavier person sits closer to the center and a lighter person sits farther out, such that

F1 d1 = F2d2

When the clockwise and anticlockwise torques are equal, the seesaw is in rotational equilibrium.

This happens because the greater force acting at a shorter distance can balance the smaller force acting at a longer distance.

 

Principle of Moments

The Principle of Moments states that when an object is in rotational equilibrium, the total clockwise moment about an axis equals the total anticlockwise moment about that axis.

Total Clockwise Moment = Total Anticlockwise Moment

This principle helps explain how seesaws, balances, levers and other mechanical systems remain balanced.

Example: Balancing a Seesaw

A downward force of 10 N acts at a distance of 0.6 m to the left of a seesaw’s central pivot.

What downward force must act at a distance of 0.4 m to the right of the pivot to balance the seesaw?

Anticlockwise moment:

10 × 0.6 = 6 N m

Clockwise moment:

F × 0.4 = 6 N m

F = 6 / 0.4 = 15 N

Answer: A downward force of 15 N is required on the right side.

The smaller distance from the pivot requires a greater force to produce the same turning effect.

The smaller distance from the pivot requires a greater force to produce the same turning effect.

Balanced Forces vs Balanced Torques

Balanced forces and balanced torques represent two different conditions.

    • Balanced Forces: The net force acting on an object is zero, so the object has no linear acceleration.
    • Balanced Torques: The net torque acting on an object is zero, so the object has no angular acceleration.

For an object initially at rest to remain completely at rest, both conditions must be satisfied.

Net Force = 0 and Net Torque = 0

However, balanced forces do not necessarily mean balanced torques.

Example: Turning a Book

Imagine a book lying flat on a smooth table. Two equal and opposite horizontal forces along different parallel lines — one pushing the upper-right corner towards the right with the right hand, and the other pushing the lower-left corner towards the left with the left hand, as viewed from above.

    • The two forces cancel each other, so the net force is zero.
    • However, both forces produce a clockwise turning effect about the centre of the book.

Therefore:

    • Net Force = 0
    • Net Torque ≠ 0

The book can rotate without its centre of mass accelerating in a straight line.

Example: A Balanced Seesaw

Consider our earlier example of a seesaw.

A downward force of 10 N acts at a distance of 0.6 m to the left of the pivot, while a downward force of 15 N acts at a distance of 0.4 m to the right.

The clockwise and anticlockwise torques are equal, so the net torque is zero.

However, the two downward forces together amount to 25 N.

The central pivot supplies an upward supporting force of 25 N, assuming the weight of the seesaw itself is negligible.

Therefore:

    • Net Force = 0
    • Net Torque = 0

The seesaw remains balanced and at rest.

This illustrates that both forces and torques must be considered when determining whether an object is in complete equilibrium.

Torque in Everyday Life

Torque is involved in many familiar activities and mechanical devices.

    • Opening a Door

A door handle is positioned far from the hinges to provide a greater turning effect for the same applied force.

    • Using a Spanner

A long spanner provides a greater perpendicular distance from the nut, allowing a given force to produce more torque.

    • Riding a Bicycle

The force applied to the pedals produces torque about the crank axis, helping rotate the bicycle’s drivetrain.

    • Turning a Steering Wheel

Applying forces to the steering wheel produces torque about its central axis, enabling the driver to control the steering mechanism.

    • Using a Seesaw

A seesaw illustrates how forces acting at different distances from a pivot can produce equal and opposite moments.

    • Electric Motors

Electric motors produce torque that drives rotating components in appliances, machinery and vehicles.

Key Points

    • Torque is the turning effect produced by a force about a point or axis.
    • Torque depends on the force, its direction and the perpendicular distance from the axis of rotation.
    • Torque is calculated using τ = F × d, where d is the perpendicular distance to the force’s line of action.
    • The SI unit of torque is the newton-metre (N m).
    • Torque can act clockwise or anticlockwise about an axis.
    • The Principle of Moments describes the balance of clockwise and anticlockwise moments in rotational equilibrium.
    • An object is in rotational equilibrium when the net torque acting on it is zero.
    • A net torque can produce angular acceleration.
    • Moment of inertia describes resistance to changes in rotational motion.
    • Torque is important in tools, vehicles, machines, levers and everyday activities.